Stiffeners alùmanum
dealbhan (mm)
92mm x 92mm
Freagarrach airson
101.6mm x 101.6mm x 3.8mm Post
92mm x 92mm
Freagarrach airson
101.6mm x 101.6mm x 3.8mm Post
92.5mm x 92.5mm
Freagarrach airson
101.6mm x 101.6mm x 3.8mm Post
117.5mm x 117.5mm
Freagarrach airson
127mm x 127mm x 3.8mm Post
117.5mm x 117.5mm
Freagarrach airson
127mm x 127mm x 3.8mm Post
44mm x 42.5mm
Freagarrach airson
50.8mm x 88.9mm x 2.8mm Rib Rail
50.8mm x 152.4mm x 2.3mm Slot Rail
32mm x 43mm
Freagarrach airson
38.1mm x 139.7mm x 2mm Slot Rail
45mm x 46.5mm
Freagarrach airson
50.8mm x 152.4mm x 2.5mm Rib Rail
44mm x 82mm
Freagarrach airson
50.8mm x 165.1mm x 2mm Slot Rail
44mm x 81.5mm x 1.8mm
Freagarrach airson
88.9mm x 88.9mm x 2.8mm T Rèile
44mm x 81.5mm x 2.5mm
Freagarrach airson
88.9mm x 88.9mm x 2.8mm T Rèile
17mm x 71.5mm
Freagarrach airson
Piocaid 22.2mm x 76.2mm x 2mm
dealbhan (a-staigh)
3.62"x3.62"
Freagarrach airson
4"x4"x0.15"Post
3.62"x3.62"
Freagarrach airson
4"x4"x0.15"Post
3.64"x3.64"
Freagarrach airson
4"x4"x0.15"Post
4.63"x4.63"
Freagarrach airson
5"x5"x0.15"Post
4.63"x4.63"
Freagarrach airson
5"x5"x0.15"Post
1.73"x1.67"
Freagarrach airson
2"x3-1/2"x0.11"Rib Rail
Rèile Slot 2"x6"x0.09".
1.26"x1.69"
Freagarrach airson
1-1/2"x5-1/2"x0.079" Slot Rail
1.77"x1.83"
Freagarrach airson
2"x6"x0.098" Rib Rail
1.73"x3.23"
Freagarrach airson
2"x6-1/2"x0.079" Slot Rail
1.73"x3.21"x0.07"
Freagarrach airson
3-1/2"x3-1/2"x0.11"T Rèile
1.73"x3.21"x0.098"
Freagarrach airson
3-1/2"x3-1/2"x0.11"T Rèile
17mm x 71.5mm
Freagarrach airson
7/8"x3"x0.079"Piocaid
Bidh stiffeners alùmanum gu tric air an cleachdadh gus taic agus seasmhachd a bharrachd a thoirt do fheansaichean PVC.Faodaidh cur-ris alùmanum stiffeners cuideachadh gus casg a chuir air sagging no boghadh na feansa, a dh’ fhaodadh tachairt thar ùine mar thoradh air a bhith fosgailte do eileamaidean leithid gaoth is taiseachd.Tha deagh bhuaidh aig stiffeners alùmanum air feansaichean PVC, oir tha iad a’ cuideachadh le bhith a’ leudachadh beatha agus ag àrdachadh seasmhachd na feansa.Ach, tha e cudromach dèanamh cinnteach gu bheil na stiffeners alùmanum air an stàladh gu ceart agus gu bheil iad co-chòrdail ris an stuth PVC gus cùisean sam bith leithid creimeadh no meirge a sheachnadh.
Bithear a’ dèanamh stiffeners no cuir a-steach alùmanum tro inneal eas-tharraing.Tha seo a’ ciallachadh a bhith a’ teasachadh billet alùmanum suas gu 500-600 ° C agus an uairsin ga sparradh tro bhàs gus an cumadh a tha thu ag iarraidh a chruthachadh.Bidh am pròiseas eas-tharraing a’ cleachdadh cuideam uisgeachaidh gus am bilet alùmanum bog a phutadh tro fhosgladh beag a’ bhàis, ga dhèanamh na fhad leantainneach den chumadh a tha thu ag iarraidh. le teas gus na feartan aige, seasmhachd agus strì an aghaidh meirge a neartachadh.Às deidh a ’phròiseas làimhseachaidh a tha a’ fàs nas sine, tha na pròifilean alùmanum an uairsin deiseil airson an cleachdadh ann an tagraidhean feansa PVC a ’toirt a-steach stiffeners post, stiffeners rèile, msaa.
Airson a ’mhòr-chuid de luchd-ceannach FenceMaster, bidh iad cuideachd a’ ceannach stiffeners alùmanum fhad ‘s a tha iad a’ ceannach pròifilean feansa PVC.Leis gu bheil na stiffeners alùmanum FenceMaster de chàileachd àrd le prìs fàbharach air an aon làimh, air an làimh eile, is urrainn dhuinn na stiffeners alùmanum a chuir ann am puist agus rèilichean, a dh ’fhaodadh cosgais logistics a lughdachadh gu mòr.Nas fheàrr na h-uile, tha iad nan deagh gheama dha chèile.
